Settings which apply to categories of Vehicle Types |
You can configure the RPM at which an "over RPM" event is recorded and available in reports in the Connect Web portal and assign different over RPM values to different vehicle groups within your fleet.
Vehicle type settings, along with descriptions of them, and guidelines for how to enter a value for each setting, are listed in the table below.
Editing and saving the group will push the changes to the device.
Name used to identify this vehicle type settings group. |
Value of highest RPM value allowed on this vehicle. Value must be between 800 and 3000. A value of 0 will disable this feature. |
The threshold for Deceleration (Hard Brake) in MPH/per second before which the vehicle will trigger the Deceleration event. Value must be between 1 and 15 MPH. A value of 0 will disable this feature. Default = 9 |
For ELDs connected to vehicles via ODB2 and Engine Time is not reported, Enabling this value will cause the ELD to perform the following alternative functions: 1. Track engine time when RPM is present 2. Avoid reporting engine time malfunction |
0. 250K 1. 500K 2. auto baud on Atmel SAM4 and 500K on Atmel SAM7 |
For devices that have not yet moved to ELD mode and/or that are not required to be in ELD mode in the future. |