OverviewDriverTech implementation of Drivewzye currently includes Drivewyze PreClear features:
SEE the Weigh Station Bypass Overview page provides details about Drivewyze PreClear features ConfigurationWeigh Station Bypass Administration provides ability for FleetWatcher users to administer their Drivewyze Fleet Account and Vehicles. Fleet Configuration and Default SettingsCurrent Fleet Configuration, while still under development, can be viewed on the first tab of the Management -> Weigh Station Bypass page in FleetWatcher. |
|
Vehicle Image Configuration
A Vehicle Image is a picture of the Vehicle which is displayed for Weigh Station Officers to be able to visually identify a specific Vehicle as it either Bypasses or Pulls Into the POE
There are two types of Vehicle Image available for you to use
- Required: The Vehicle Image associated with your Drivewyze Account which is applied to all Vehicles by default
- Optional: Additional Vehicle Images which can be applied to Vehicles which do not appear visually the same as the Default Vehicle Image
Pictures to use as a Vehicle Image should be taken
| Example of Vehicle Placement in the picture (click to enlarge): |
Adding Vehicle Images
Vehicle Images can be added in the following ways:
- The Default Vehicle Image added to your Drivewyze Account (required)
- Additional pictures added to the [Fleet Images] tab (optional)
- Any Images that you have added will be available for selection when Adding or Bulk Adding Vehicles
- Any Images which were added AFTER Vehicle(s) were added can be set by Editing each Vehicle desired
Editing Vehicle Images
Vehicle Images can be edited to change the name or image by clicking on the edit button to the right of the record.
Any Images which are Changed after being assigned to a Vehicle will automatically be applied to each Vehicle referencing said image.
Vehicle Configuration
Using the page located at Management -> Weigh Station Bypass you can add Vehicles which currently exist in DriverTech to Drivewyze.
Once a Vehicle is added to Drivewyze it cannot be removed but can have all services set to be 'inactive' achieving the same result. The reason for this is to ensure that Monthly Subscription counts will always be accurate.
Adding Vehicles
The following options will assist in your Onboarding and Management Strategy | ||
Vehicles can be added in the following ways:
| ||
Strategy when Vehicles are Added to Drivewyze | Drivewyze Configuration | Drivewyze Vehicle PreClear Configuration |
---|---|---|
Some PreClear Features Enabled | Fleet configured for
| Vehicle Pre-Configuration
Vehicle Post-Configuration
|
All PreClear Features Disabled | Fleet configured to
|
Editing Vehicles
Vehicles can be edited after being added to Drivewyze in the following ways:
- One at a time by clicking on the [edit] button to the left of the Vehicle record
- ALL at once using the [bulk edit] button at the right of the tabs
- Note that [bulk edit] is meant only for changing PreClear Features and Transponder settings
Auditing
Drivewyze® is a registered trademark of Intelligent Imaging Systems IncTM.