Page History

How-to Calibrate Your Screen

Step-by-step guide

This procedure is for the DT4000 Rev 6 and lower devices:

1. If your screen is responding to touch: Touch the "Calibrate" icon.

   

2. Touch on the crosshair target. It should move around the screen 4 times.

   Image Modified

   Image Modified

   Image Modified

   Image Modified

Your screen should now be calibrated.

...

1. If your screen is not responding or is too far out of calibration to touch the icon:
   1. Hold the PHYSICAL menu button down for 10 seconds while logged in. The physical menu button can be found on the monitor unit but below the screen itself.
   2. New Style
      Image Added
   3. Old Style
      Image Added
   4. The calibration screen should now come up.  
   5. Touch the crosshair targets in order to calibrate.
2. Alternatively you can plug a mouse into the USB port and select the calibration icon.
   1. Touch the crosshair targets in order to calibrate.

...