Skip to end of metadata
Go to start of metadata

Could Not Reimage


Could Not Reimage


  1. IMPORTANT NOTE: Never unplug the Reimager while the unit is on. Turn off the unit before unplugging the Reimaging device.

  2. If you have a 3 piece system(Antenna, Display, CPU) installed, do not plug into the Display to try to reimage

    1. DO NOT USE the DISPLAY'S USB PORTS, plug directly into the CPU.

  3. You are most likely experiencing USB port connection issues.

  4. Check the USB connections

  5. Try a USB cable that you know works
  6. Try another USB port

Related articles

 Back to The Top