null

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Problem

Unit Powers on but Display is Blank

Solution

  1. Verify cables are properly secured in the back of the display and truck.
  2. If the LED light is showing on the display:
    1. Turn off the truck's ignition.
    2. Press and release the power  .
    3. If no response, press and hold the on/off button  - then leave turned off for about 2 minutes.
    4. Then press and release the power button  and check to see if unit turns on.
    5. If the unit does not turn on, then press and hold the power button  for 30 seconds, and check to see if unit turns on.
  3. As a last resort- if the problem persists, disconnect power to the TruckPC for about 30 minutes.
    1. Unplug power from TruckPC or flip the battery kill switch.
  4. Please call technical support if the issue has not been resolved.
 As a last resort- if the problem persists, disconnect power to the TruckPC for about 30 minutes.

Unplug power from TruckPC or flip the battery kill switch.

  • No labels