Green Power light is on - Display is Blank
Problem:
Unit Power light turns on but Display is Blank
Solution:
- Verify cables are properly secured in the back of the display and truck.
- If the LED light is showing on the display:
- Turn off the truck's ignition.
- Press and release the power
. - If no response, press and hold the on/off button for 60 seconds - then leave turned off for about 2 minutes.
- Then press and release the power button and check to see if unit turns on.
- If the unit does not turn on, then press and hold the power button for 30 seconds, and check to see if unit turns on.
- if the problem persists, disconnect power to the TruckPC for approximately 5 minutes.
- Unplug power from TruckPC or flip the battery kill switch.
- As a last resort- disconnect power to the TruckPC for approximately 30 minutes
- Please call technical support if the issue has not been resolved.
Related articles